Measuring Range in Steel
0.025 - 19.99 inches
0.63 - 508.0 mm
The new CHECK-LINE TI-UMX-2 Underwater Wall Thickness Gauge accurately measures the wall thickness of all metals, extent of corrosion and the thickness of coatings on them -- at depths of up to 1000 feet (300 Meters).
A back-lit LCD display and illuminated housing allow divers to easily read measurements in dark water.
0.025 - 19.99 inches
0.63 - 508.0 mm
The new CHECK-LINE TI-UMX-2 Underwater Wall Thickness Gauge accurately measures the wall thickness of all metals, extent of corrosion and the thickness of coatings on them -- at depths of up to 1000 feet (300 Meters).
A back-lit LCD display and illuminated housing allow divers to easily read measurements in dark water.
An over-sized control button and clever menu structure allows easy gauge setup and navigation through menus above or below water even when wearing thick gloves.
The TI-UMX-2 can store up to 5000 readings including A-Scan Waveforms and settings for each individual measurement. There are 2 file structure options; sequential with auto identifier and alpha numeric grid (row/column) format. The UMX-2 can transfer data and configuration settings to a PC using our DataComm software. (Software and transfer cable included)
Velocity Settings
The TI-UMX2 has 8 preset velocities and 1 custom velocity allowing the user to customize it for specific applications, or to tune the calibration to be optimized for a specific type of material. The list of preset velocities are as follows:
- 1. Aluminum 2024
- 2. Stainless Steel 302
- 3. Steel4340
- 4. Iron
- 5. Cast Iron
- 6. PVC
- 7. Polystyrene
- 8. Polyurethane
- 9. Custom 1
- Includes NIST-Traceable Calibration Certificate
- Housing is rated for dive depths up to 1000 ft (300 meters) with backlit display
- Resolution of 0.001" (0.01 mm) with user-selected units of inch or mm
- Includes built-in datalogger for 5000 readings, settings and waveforms in sequential or "grid" (row/column) format
- Automatic probe recognition and auto zero
- Supplied with data transfer cable and FREE data analysis software
- Measure modes include: Pulse-Echo, Pulse-Echo w/ Coating, Echo-Echo and Triple Echo
- Measures BOTH Wall and Coating Thickness
- Both Dual Element and Single Membrane Probes are offered
- Standard Probe supplied is 1/2"-5MHz HD-Coating, Underwater p/n T-074-2906
- All settings for gauge and datalogging can be done via software if desired
- CE-certified
- Warranty: Gauge: 3 Years Probes: 90 Days
- Made in USA
Use of single button and clever menu structure permits easy navigation through all settings when underwater
*Highlighted fields indicate default settings.
Note: TCG mode (Triple-Echo Verify) is only available when T-9441-2809 probe is connected to TI-UMX2 Gauge.
| Range in Steel | Pulse-Echo Mode:(P-E) Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 500 mil |
| Resolution | .001" (0.01 mm) |
| Velocity Range | 8 fixed and 1 programmable Material Velocities .0492 to .5510 in./µs (1250 to 13995 m/sec) |
| PreSet Velocities | 1. Aluminum 2024 - 0.2510 in/µs 2. Steel 4340 - 0.2330 in/µs 3. Stainless Steel 302 - 0.2230 in/µs 4. Iron - 0.2320 in/µs 5. Cast Iron - 0.1800 in/µs 6. PVC - 0.0940 in/µs 7. Polystyrene - 0.0920 in/µs 8. Polyurethane- 0. |
| Probe | STANDARD: Underwater Type, 1/2"-5MHz Dual-Element HD-Coating Probe OPTIONAL: Underwater Type, 1/2"-3.5MHz Dual-Element HD-Coating Probe MEMBRANE: 1/2"-5MHz Single-Elelent Contact Type Probe OTHER: Dual Element Typ |
| Display | 4½ - Digit, 0.5" Backlit LCD (2nd Display for menus, 3/8" 6 character LCD) |
| Backlighting | Both Displays can be user set for ON/OFF/AUTO |
| Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
| Connectors | Lemo, Underwater Type |
| Battery Type | Three (3) 1.5V AA alkaline batteries (or 1.2V NiCad) |
| Battery Life | BACKLITE OFF, typical 50 hours on alkaline (15 hours on NiCad) BACKLITE ON, typical 15 hours on alkaline (8 hours on Nicad) |
| Accessories Included | Velcro wrist strap, 4 oz. bottle of coupling fluid, AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable with USB converter and spare gasket & lube kit including Operating Instruction Manual - all in a foa |
| Datalogger | GRID or SEQUENTIAL data storage Capacity: 5000 wall & coating readings, settings and waveform graphics |
| Data Output | Bi-directional RS232 serial port, with USB converter. Windows® PC interface software |
| Operating Modes | PE: Pulse-Echo PECT: Pulse-Echo Coating EE: Echo-Echo EEE: Triple Echo TCG (requires T-9441-2809 MEMBRANE Probe) |
| Pulser | Dual square wave pulsers |
| Receiver | Dual receivers - manual or AGC gain control with 110dB range (limited) |
| Manual Gain | Limited to 5 gain settings (vlow, low, med, high, vhigh (42 to 50 dB) |
| Temp. Limits | Ambient: -20 to 140° F (-30 to 60° C) |
| Housing | High strength transparent plastic IP 68 Waterproof Rating Depth Rating: 1000 feet (300 meters) |
| Keypad | Single button, magnetically coupled switch |
| Size | Length (9.0 in/229 mm) Diameter (2.375 in/60.33 mm) |
| Weight | 1.5 lbs (680g) - with 3 AA batteries |
| Warranty | Gauge: 3 Years Probe: 90 Days |
| Certification | CE Approved, Factory calibration traceable to national standards |
The TI-UMX2 is supplied as a complete kit with the gauge, Standard Transducer P/N T-074-2906, Velcro wrist strap, 4 oz. bottle of coupling fluid, 3-AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable with USB converter and spare gasket & lube kit including Operating Instruction Manual - all in a foam-fitted carrying case.
| Item | Description | Price | ||
|---|---|---|---|---|
Underwater Ultrasonic Thickness Gauge kit with T-074-2906 probe, Z-185-0001 | $4,000.00 | |||
Underwater Ultrasonic Thickness Gauge kit with T-9441-2809 probe for Triple-Echo Mode (TCG) | $4,000.00 | |||
| Accessories | ||||
T-074-2906 | 1/2" diameter, 5.0 MHz dual element transducer, hi-damp, coating, for TI-UMX2, Top in, Potted | $630.00 | ||
T-074-9906 | 1/2" diameter, 3.5 MHz dual element, high-damp coating probe for TI-UMX2 | $630.00 | ||
T-9441-2809 | 1/2" diameter, 5 MHz single element, membrane probe for TI-UMX2 | $630.00 | ||
A-185-0001 | Maintenance Kit (includes 2 O-rings and 6 grams of lubricant) | $6.00 | ||
BATT-RC4AA-WC | 4-pack AA Ni-MH Rechargeable Batteries & Charger Kit | $35.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
