The PR-9 has three material calibration options (single point, two point, and target velocity) for increased accuracy. Cylinder wall mapping software available for manually creating reports. Finally, our 5 year limited warranty indicates how we feel about the quality.
- Includes NIST Calibration Certificate
- Special-purpose probes are offered for a variety of applications
- High Speed Scan Mode displays the lowest measurement found during a scan
- Resolution of 0.001 inch (0.01 mm)
- 5 Year Warranty*
- CE Certified
One probe is usually good for use on both Cast Aluminum and Cast Iron Engine Blocks. The 2 inch radius allows the probe to measure the concave surface inside cylinders. The radius is gentle enough that the same probe can also be used to measure on the flat surfaces "decks" on the block. This one probe will work for over 90% of Cast Aluminum or Cast Iron Blocks.
T-104-2120
> 0.500"/5MHz with 2 inch radius
> this is the standard probe supplied with PR-9
*In instances where the above probe does not work, or if the block is made from a very old Aluminum Cast Aluminum, an alternate probe should be specified p/n T-104-4120 (0.500"-10MHz), also supplied with a 2" radius.
For Heads (Ports)
Probe selection depends upon type of material; cast iron or cast aluminum. This probe has a 0.55" radius and is supplied with either a 1 inch wand or 9 inch wand, depending upon user preference.
Cast Iron
> 0.250"/5MHz with 0.55" Radius
with 1 inch wand T-162-2110
with 9 inch wand T-132-2110
Cast Aluminum
> 0.250/10MHz with 0.55" Radius
with 1 inch wand T-162-4110
with 9 inch wand T-132-4110
For Chassis Tubing
This would be used by chassis builders as well as sanctioning bodies (i.e. NHRA, ARCA, etc.). One probe is normally suitable for any application, assuming they do not want thru-paint capability.
T-101-4000
> 3/16"-10MHz flat bottom (no radius)
| Range | Measures from 0.025 to 36.00 inches (0.63 to 914.4 millimeters). Range dependent on material and transducer type. |
| Resolution | .001 inches / 0.01mm |
| Velocity Range | 0.0120 to .7300 in/μs / 305 to 18,542 m/sec |
| Units | English & Metric (inch or mm) |
| Transducer Types | Dual Element (1 to 10 MHz) |
| Power Source | Two 1.5V alkaline, 1.2V NiCad, or 1.5V Lithium AA cells. |
| Battery Life | Typically operates for 45 hours on alkaline and 23 hours on NiCad. Low battery indicator on display. Auto shut-off after 5 minutes of inactivity. |
| Display | Multi-function 7 segment 4.5 digit liquid crystal display with 0.500 in digit height |
| Keyboard | Sealed membrane that is resistant to both water and petroleum products. |
| Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Operating Temperature | -22 to 167F (-30 to 75C) |
| Weigth, net | 11 ounces |
| Dimensions | 2.5 W x 5.17 H x 1.24 D inches / 63.5 x 131.3 x 31.5 mm |
| Warranty | 5 year limited (90 days on probes) |
| Certification | CE Approved, Factory calibration traceable to national standards |
| Item | Description | Price | ||
|---|---|---|---|---|
Dakota R9 / PR-9 Ultrasonic Thickness Gauge with T-104-2120 Probe for cylinders walls & decks, Z-309-0001 / Z-309-0002 | $1,375.00 | |||
| Accessories | ||||
Protective Rubber Boot for TI / ZX Series Small Body Ultrasonic Thickness Gauges | $95.00 | |||
Coupling Fluid - 4 oz / 118 ml | $25.00 | |||
SoundSafe Coupling Fluid - 12 oz / 354 ml - NSN: 6635-01-553-0559 | $30.00 | |||
| Transducers Commonly Used With PR-9 | ||||
T-121-2100 | 3/16" diameter, 5 MHz Low Profile dual element transducer | $320.00 | ||
1/4" diameter, 5.0 MHz, dual element transducer, Side In, Potted | $320.00 | |||
T-162-2110 | 1/4" diameter, 5 MHz dual element transducer with .6" Radius and 1" wand | $330.00 | ||
1/4" diameter, 5 MHz dual element transducer with .6" Radius and 9" wand | $330.00 | |||
1/2" diameter, 5 MHz dual element transducer with 2" Radius | $330.00 | |||
3/16" diameter, 10 MHz, dual element transducer, Side in, Potted | $350.00 | |||
T-162-4110 | 1/4" diameter, 10 MHz Low Profile Dual Element Transducer with .6" Radius and 1" wand | $350.00 | ||
T-132-4110 | 1/4" diameter, 10 MHz Low Profile Dual Element Transducer with .6" Radius and 9" wand | $350.00 | ||
