The HPX DL+ Ultrasonic Thickness Gauge is designed for use on materials that are difficult for sound to penetrate, due to the lack of material consistency, grain structure, and overall thickness. Multiple high voltage pulser options, as well as filters tuned for lower frequency transducers (500 kHz – 10 MHz), the HPX compliments our product range by adding additional material types to our list of application possibilities.
Typical applications are fiberglass sheets, pipes, storage tanks, aerospace composites, boat hulls, conveyor belts, composite plastics, etc. There are a variety of features and tools to accommodate a number of material types and applications.
The electronic platform is FPGA driven for speed and accuracy. The screen refresh rate of 25 Hz contributes to the overall responsiveness of the gauge. The built-in data logger has two file format options, grid or sequential, and is equipped with an internal 4 GB SD card for memory. Connectivity to a standard PC or Apple via USB-C, and used in conjunction with our Windows® PC or OSX reporting software available for download.
- Supplied with NIST Traceable Calibration Certificate
- 2 Year Warranty
- 4gb of memory for saving Grids, Sequential Data, Screen Captures, and 64 Setups
- USB Data Output
- A-Scan, B-Scan, and Digit Display Modes
| Pulse-Echo Range | Steel .050 in. – 100.0 ft. (1.27 mm – 30.5 M) Composites .100 in. – 5.00 in. (2.54 mm – 127 mm) |
| Echo-Echo Range | Steel .100 in.–3.0 ft. (2.54 mm–91.44 cm) |
| Echo-Echo Verify Range | Steel .100–6.0 in. (2.54–152.4 mm) |
| Resolution | (selectable): +/- .01 inch (0.1 mm). +/- .001 inch (0.01 mm) |
| Velocity Range | 0.0122 to 0.7300 inches/µs 309.88 to 18542 meters/sec. |
| Pulser | Spike – 200 volt, Square Wave – 400 volt, Tone Burst 400 volt, all adjustable with variable pulse widths and voltage settings |
| Receiver | Manual or AGC gain control with 110dB range, varies with mode selected. Adjustable damping (50, 75, 100, 300, 600 & 1500 ohms) |
| Frequency Range | 500 kHz to 10MHz |
| Timing | Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer |
| Power | Three AA cells. Alkaline – 35 hrs, Nicad – 10 hrs, and NI-MH – 35 hrs. *dependent on pulser & backlight settings. |
| Operating Temperature | 14 to 140F (-10C to 60C) |
| Data Output | USB-C port. Windows® PC interface software |
| Display | 1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm); EL backlit (on/off/auto invert) |
| Transducer Compatibility | Single Contact (1 to 10 MHz, and custom 500 kHz delay line (HPD1005B) |
| Transducer Connector | Locking quick disconnect LEMO “00” connector |
| Dimensions | Width (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm) |
| Weight | 13.5 ounces (with batteries) |
The HPX DL+ is supplied as a complete kit including HPX gauge, custom 1” Delay Line Transducer (Rubber Delay Line) & Cable, Couplant,
Manual, Certificate of Calibration, AA Batteries, PC Software (download), and transfer cable in a foam fitted carrying case.
| Item | Description | Price | ||
|---|---|---|---|---|
HPXDLP | PMX4-DL High-Penetration Ultrasonic Wall Thickness Gauge with T-857-8608 Delay Line Transducer - Z-225-0001 / Z-225-0002 | $3,650.00 | ||
| Accessories | ||||
T-857-8608 | 1" x 0.5MHz Single Element Delay Line High Penetration Transducer | $1,050.00 | ||
Protective Rubber Boot for Tall Format Ultrasonic Thickness Gauges | $115.00 | |||
BNC - LEMO 00 Single Probe Transducer Cable, 6 foot length | $80.00 | |||
V-000-0005 | Low Viscosity Coupling Fluid, 4 oz bottle | $25.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
