Unique Smart Adapters
The unique Smart Adapters simulate the screw joint and do not need to be backed-off after each test. This features increases testing efficiency and ease of use by reducing the time between each test. Results can be downloaded through the USB port for analysis with data acquisition software. The Series i torque calibrators are compatible with SW-1SV-USB software.
The peak torque or peak down torque in breakaway tests is captured automatically. The Series i torque calibrator displays Max, Min and Avg statistics. The tester can read values in lbf-in, kgf-cm, N-cm and N-m. What’s Included
All series i torque testers are sold in kit form complete with tester, hard carrying case, 2 driver adapters and AC charger/adapter. All testers come with a 3-Point Certificate traceable to NIST. ISO Certificates are available at an additional charge.
Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester).
- Capacities up to 221lb-in / 25 Nm
- Selectable units lbf-in, Kgf-cm, N-cm and N-m
- Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing
- 2 – driver adapters included: i-8 & i-80 come with smart adapters, CD-150 & DI-25 come with spring adapters
- Peak, Real Time and Peak Down measuring modes (selectable)
- Measure both clockwise and counterclockwise
- USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- Statistics: number of data, Max, Min, Avg
- Heavy-duty metal construction
- Runs on internal NiCad batteries or AC adapter
- 3/8″ drive for socket wrenches
| Model | Capacity | Resolution |
|---|---|---|
| i-8 | 7 lb-in 8 kg-cm 78.6 N-cm | 0.001 lb-in 0.001 kg-cm 0.01 N-cm |
| i-80 | 70 lb-in 80 kg-cm 7.86 Nm | 0.01 lb-in 0.01 Kg-cm 0.001 Nm |
| CD-150M | 130 lb-in 150 kg-cm 15 Nm | 0.1 lb-in 0.1 Kg-cm 0.01 Nm |
| DI-25 | 217.2 lb-in 250 kg-cm 25 Nm | 0.1 lb-in 0.1 Kg-cm 0.01 Nm |
| Item | Description | Price | ||
|---|---|---|---|---|
CD-150M | Digital Torque Tester, 130 lb-in / 15 Nm Capacity | $2,035.00 | ||
| Accessories | ||||
ISO-17025 | ISO-17025 Accredited Calibration with Certificate | $200.00 | ||
SS-209 | USB Output Cable for Torque Testers | $33.00 | ||
Data Acquisition Software for Torque Testers with RS-232 or USB ports | $242.00 | |||
OW-025E | Smart Adapter, 10 lb-in, M2.6 (#6-32) screw | $286.00 | ||
OW-10E | Smart Adapter, 10 lb-in, M3 (#6-32) screw | $286.00 | ||
OW-20E | Smart Adapter, 18 lb-in, #8-32 screw | $286.00 | ||
OW-60E | Smart Adapter, 100 lb-in, M6 (#1/4-20) screw | $286.00 | ||
SJ-50E | Spring Adapter, 50 lb-in, 5/16-18 screw, For Di-25 | $236.50 | ||
SJ-200E | Spring Adapter 50~175 lbf-in 3/8 - 16 Screw, For Di-25 | $324.50 | ||
6A-061WP12 | Power Adapter for Cedar Torque Testers with USB Output (formerly 3A-066WP12-120) | $60.50 | ||
