MTM torque testers are designed to provide a precise and economical way to measure and calibrate a wide range of torque tools including manual and powered screwdrivers and wrenches*. Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM, up to 4 transducers can be integrated into one compact housing. An external transducer can be connected to further increase the measuring range (requires optional external input).
The small footprint also allows for a clean, well-organized workspace. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.
Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.
*Power tools require the use of a run-down-fixture
**Not for use with impact tools and torque multipliers
- Includes NIST Traceable calibration certificate with data for each transducer
- Run-Down-Fixture (Joint Simulator) included with 1/4" and 3/8" transducers (1-10)
- Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m
- Available with 2, 3 or 4 torque transducers
- Small footprint of the MTM allows for a clean, well-organized work space
- 200% Overload protection
- LED Indicator Shows Active Transducer
- Connect external transducers with optional input jack
- Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit.
- Hi-Lo Limits for Go-NoGo testing of tools
- Accuracy of ±0.5% of Indicated Value (within calibrated range)
- For Testing According to ISO 6789:2017
| Model | Range | Drive Size |
|---|---|---|
| 1. ITIO-10* |
1 - 10 ozf-in
0.1 - 0.6 lbf-in
0 - 0.1 lbf-ft
72 - 720 gf-cm
0.1 - 0.7 kgf-cm
0 - 0 kgf-m
0.7 - 7.1 N-cm
0 - 0.1 N-m
|
1/4" |
| 2. ITIO-50 |
5 - 50 ozf-in
0.3 - 3.1 lbf-in
0 - 0.3 lbf-ft
360 - 3600.4 gf-cm
0.4 - 3.6 kgf-cm
0 - 0 kgf-m
3.5 - 35.3 N-cm
0 - 0.4 N-m
|
1/4" |
| 3. ITIO-100 |
10 - 100 ozf-in
0.6 - 6.3 lbf-in
0.1 - 0.5 lbf-ft
720 - 7200.8 gf-cm
0.7 - 7.2 kgf-cm
0 - 0.1 kgf-m
7.1 - 70.6 N-cm
0.1 - 0.7 N-m
|
1/4" |
| 4. ITI-10 |
16 - 160 ozf-in
1 - 10 lbf-in
0.1 - 0.8 lbf-ft
N/A
1.2 - 11.5 kgf-cm
0 - 0.1 kgf-m
11.2 - 112 N-cm
0.1 - 1.1 N-m
|
1/4" |
| 5. ITI-25 |
40 - 400 ozf-in
2.5 - 25 lbf-in
0.2 - 2.1 lbf-ft
N/A
2.9 - 28.8 kgf-cm
0 - 0.3 kgf-m
28.2 - 282 N-cm
0.3 - 2.8 N-m
|
1/4" |
| 6. ITI-50 |
80 - 800 ozf-in
5 - 50 lbf-in
0.4 - 4.2 lbf-ft
N/A
5.8 - 57.6 kgf-cm
0.1 - 0.6 kgf-m
56.4 - 564 N-cm
0.6 - 5.6 N-m
|
1/4" |
| 7. ITI-100 |
160 - 1600 ozf-in
10 - 100 lbf-in
0.8 - 8.3 lbf-ft
N/A
11.5 - 115 kgf-cm
0.1 - 1.2 kgf-m
112 - 1129.8 N-cm
1.1 - 11.2 N-m
|
1/4" |
| 8. ITI-250 |
400 - 4000 ozf-in
25 - 250 lbf-in
2.1 - 20.8 lbf-ft
N/A
28.8 - 288 kgf-cm
0.3 - 2.9 kgf-m
282 - 2824.6 N-cm
2.8 - 28.2 N-m
|
3/8" |
| 9. ITI-500 |
800 - 8000 ozf-in
50 - 500 lbf-in
4.2 - 41.6 lbf-ft
N/A
57.6 - 576 kgf-cm
0.6 - 5.8 kgf-m
564 - 5649.2 N-cm
5.6 - 56.4 N-m
|
3/8" |
| 10. ITI-1000 |
N/A
100 - 1000 lbf-in
8.3 - 83.3 lbf-ft
N/A
115 - 1152.1 kgf-cm
1.2 - 11.5 kgf-m
N/A
11.2 - 112 N-m
|
3/8" |
| 11. ITF-100 |
N/A
120 - 1200 lbf-in
10 - 100 lbf-ft
N/A
138 - 1382.5 kgf-cm
1.4 - 13.8 kgf-m
N/A
13.5 - 135 N-m
|
1/2" |
| 12. ITF-150 |
N/A
180 - 1800 lbf-in
15 - 150 lbf-ft
N/A
207 - 2073.8 kgf-cm
2.1 - 20.7 kgf-m
N/A
20.3 - 203 N-m
|
1/2" |
| 13. ITF-250 |
N/A
300 - 3000 lbf-in
25 - 250 lbf-ft
N/A
345 - 3456.4 kgf-cm
3.5 - 34.5 kgf-m
N/A
33.8 - 338 N-m
|
1/2" |
| 14. ITF-500 |
N/A
600 - 6000 lbf-in
50 - 500 lbf-ft
N/A
691 - 6912.7 kgf-cm
6.9 - 69.1 kgf-m
N/A
67.7 - 677 N-m
|
3/4" |
| 15. ITF-600 |
N/A
720 - 7200 lbf-in
60 - 600 lbf-ft
N/A
829 - 8295.3 kgf-cm
8.3 - 82.9 kgf-m
N/A
81.3 - 813 N-m
|
3/4" |
| 16. ITF-750 |
N/A
900 - 9000 lbf-in
75 - 750 lbf-ft
N/A
N/A
10.3 - 103 kgf-m
N/A
101 - 1016.9 N-m
|
3/4" |
|
|
*ITIO-10 accuracy is +/-1% from 10-100% of capacity
Additional transducers can be attached via the optional external input port.
All 1/4" and 3/8" Drive transducers are supplied with run-down fixtures.
Don't see the range you need? Custom ranges are available, please call 800-645-4330 to discuss your application.
ER - Extended Range Option increases certified range to 5-100% (instead of 10-100%)
Example of MTMDP-3S with 3 transducers
This system has an overall range of:
1 - 1000 lb-in / 0.1 - 83 lb-ft / 0.1 - 112 Nm
using the following 3 transducers:
- 4. ITI-10: 1 - 10 lb-in, 1/4” Drive
- 7. ITI-100: 10 - 100 lb-in, 1/4” Drive
- 10. ITI-1000: 100 - 1000 lb-in, 3/8” Drive
The part # for the above configuration would be MTMDP-3S-4-7-10
The AWS-1000 series mechanical torque wrench loaders are designed for use with our IT Transducers, MTM and TT-QCM torque testers. These precision torque loaders allow operators to precisely test and calibrate torque wrenches up to 1000 lb-ft / 1350 Nm with measuring accuracy up to ± 0.25% of indicated readings, satisfying metrology lab requirements while providing the durability required for production environments.
An optional motor kit allows for automated testing, improving speed and repeatability.
| Calibrated Range | 10-100% Full Scale, bi-directional (Standard) |
| Extended Range | 5-100% Full Scale, bi-directional (ER Option) |
| Accuracy | ±0.5% of indicated value (within calibrated range) |
| Resolution | 4 Active Digits |
| Overload Protection | 200% Full Scale bi-directional |
| Operating Modes | Track, Peak, 1st Peak |
| Filtering | Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz |
| Memory | data storage of up to 999 readings |
| Data Output | RS-232 |
| Display | 62 x 62mm backlit LCD |
| Alarm Limits | Panel Mounted LED for Visual Alarm Limits |
| Power | NiMH rechargeable batteries provide 8-10 hours continuous use |
| Weight | 6-12 lbs, depends on number of transducers and configuration |
| Operating Temp | 32 - 120 °F (0-50 °C) |
| Warranty | 1 Year |
| Calibration Certificate | Includes NIST Traceable calibration certificate with data for each transducer |
| Standard Accesories | Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger |
| Optional Accessories | Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option |
S Models Any transducer 1/4" or 3/8" Drive (up to 1000 lb-in / 112 Nm Capacity)
L Models Any transducer 1/2" Drive or larger (100 lb-ft / 135 Nm Capacity)
| Item | Description | Price | ||
|---|---|---|---|---|
MTMDP-3S | Torque Tester with any 3 Transducers up to 1000 lbf-in / 112 Nm | $4,195.00 | ||
| Accessories | ||||
ER | Extended Range, increases certified range to 5-100% (instead of 10-100%) PER TRANSDUCER | $120.00 | ||
UPG-25 | Upgrade Accuracy from ±0.5% to ±0.25% - PER TRANSDUCER | $120.00 | ||
MTM-EXT | Input for External Transducers, IT Sensors | $250.00 | ||
TTS-SOFT | Torque To Spreadsheet Basic Data Transfer Software, Includes Mini Plug to USB Cable | $165.00 | ||
Torque Tester Software, For Data Analysis and Collection, includes Mini Plug to USB Cable | $325.00 | |||
MTM-CC | Carrying Case for MTM Torque Tester | $205.00 | ||
ICBL-5000-L | Mil Spec Lemo to Lemo Connecting Cable, Torque Display to Torque Tester | $310.00 | ||
MTM-HB | Horizontal Mounting Bracket for MTM | $275.00 | ||
DCPA-110M | Replacement AC-Adapter/Charger for MTM, AWS-4050, QCM, TT-3000 and others (110V AC) | $40.00 | ||
DCPA-220M | Replacement AC-Adapter/Charger for MTM, AWS-4050, QCM, TT-3000 and others (100-240V AC) | $60.00 | ||
ICBL-RS232 | RS232 Serial Cable for TT-MTM | $95.00 | ||
$ | ||||
BAT-MINI | Replacement Battery for TT-3000, MTM, QCM, AWS-4050 | $89.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
