The DIS-IP Digital Torque Tester with remote sensor is designed for verification and calibration of manual torque tools up to 362 lbf-ft / 500 Nm. The DIS-IP has an accuracy of ± 0.5% of rated capacity. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint.
Use the 800 internal memory for peak data recall or USB download for analysis by Imada data acquisition software SW-1SV-USB.
Calibrate your own torque wrenches and electric drivers and and save down time.
Use the 800 internal memory for peak data recall or USB download for analysis by Imada data acquisition software SW-1SV-USB.
Calibrate your own torque wrenches and electric drivers and and save down time.
Not for use with powered or impact tools (Ask for DI-1M impact wrench torque tester).
- Heavy duty metal construction
- lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
- 800 data memory for recall or for SPC download
- USB output for SPC capability
- Peak, Real Time and Peak Down measuring modes (selectable)
- Accuracy: ±0.5% F.S. ±1 LSD (32° to 100°F)
- Both clockwise and counterclockwise operation
- AC adapter/charger included
- Runs on internal NiCad batteries (8 hour use)
- Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep
| Model | Capacity | Drive |
|---|---|---|
| DIS-IP5 | 0.20 - 44.00 lbf-in 0.20 - 50.00 kgf-cm 2.0 - 500.0 N-cm 0.020 - 5 N-m | 1/4" |
| DIS-IP50 | 2.0 - 440.0 lbf-in 2.0 - 500.0 kgf-cm 20 - 5000 N-cm 0.20 - 50.00 N-m | 3/8" |
| DIS-IP200 | 20 - 1740 lbf-in 2.0 - 145 lbf-ft 0.20 - 20.00 kgf-cm 2.0 - 200.0 N-m | 1/2" |
| DIS-IP500 | 20 - 4400 lbf-in 2.0 - 362 lbf-ft 0.20 - 50.00 kgf-cm 2.0 - 500.0 N-m | 3/4" |
| Item | Description | Price | ||
|---|---|---|---|---|
DIS-IP500 | Digital Torque Tester with Remote Sensor, 362 lbf-ft / 500 Nm - 3/4" Drive | $1,269.00 | ||
| Accessories | ||||
ISO-17025 | ISO-17025 Accredited Calibration with Certificate | $220.00 | ||
Data Acquisition Software for Torque Testers with RS-232 or USB ports | $242.00 | |||
SS-208 | USB output cable (formerly CB-208) | $33.00 | ||
AP-100L-2 | L-Plate Mounting Bracket for DI-1M-50 | $253.00 | ||
AP-100L-3 | L-Plate Mounting Bracket for DI-1M-200 | $253.00 | ||
AP-100L-4 | L-Plate Mounting Bracket for DI-1M-500 | $225.50 | ||
6A-061WP12 | Power Adapter for Cedar Torque Testers with USB Output (formerly 3A-066WP12-120) | $60.50 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
