Specifically engineered for use in the oil and petrochemical industries, this stainless steel sensor is completely sealed and explosion-proof. Low impedance allows for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. Explosion-proof for gas, vapor, and liquid.
- Sine wave output from change in magnetic to non-magnetic
- Change in voltage proportional to magnetic flux intensity over time
- Range of 0.01" (0.25 mm) typical clearance
- Includes 10 ft. (3 m) cable
- Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3
| Output Voltage | 60 VPP MIN. |
| Coil Resistance | 170 – 210 OHM@ |
| Output Inductance | 80 mH TYP |
| Dielectric | 500V RMS @ 60 Hz |
| Leakage Resistance | 100 MEGAOHMS MIN. |
| Temp Spec. | - 65 to +200 Deg. F |
| Cable | Shielded Teflon with Teflon Jacketed Leads |
