Oversized graphic LCD is backlit and features an easy to navigate menu allowing quick access to gauge settings and options.
Five user-selected operating modes are included:
Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.
- High speed scan 200Hz
- TDG (Time Dependent Gain)
- Improved linearity tables (in all measurement modes)
- 110dB gain range
- Setups can be backed up or restored using USB connection
- Screen update rate (25Hz)
- PRF (pulse repetition frequency 250Hz)
- Line power available using USB-C to PC or standard power adapter
- Includes NIST-Traceable Calibration Certificate
- Auto probe recognition with Auto Zero or Manual Zero.
- Wide variety of dual-element probes can be used for nearly any application.
- Bar graph with user-set start end values providing highest resolution around the target thickness value.
- Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
- TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered
- Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
- 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
- Display Hi/Lo Alarm Limits with audible and visual indicators.
- 2 Year Warranty for Gauge (90 days for probe)
- Metal housing provides strong protection against harsh environments.
- Measures Coatings up to 0.100"
- IP 65 Rated
- CE Certified
- Warranty: Gauge: 2 Years Probes: 90 Days
- Made in USA
Hi-Speed Scan Mode | B-Scan Mode |
Scan Mode measures 64 times per second, displaying the max and min reading measured during the scan interval. Sample rate is 200/sec when coating measurement is off. | The B-Scan displays a time based cross section view of test material of the contour of the blind, or underside of a pipe or tank application. the B-Scan view draws at a rate of seven seconds per screen from right to left. |
Minimum Radius for Convex Surfaces | 0.350" (8.89 mm) | |
Minimum Radius for Concave Surfaces | 3" (76.2 mm) | |
Minimum Headroom | 1" (25.0 mm) | |
Minimum Sample Diameter | 0.150" (3.8 mm) | |
Minimum Substrate Thickness - F | NA | |
Minimum Substrate Thickness - NFe | NA |
Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness |
Range in Coating Only Mode | 0.0005" - 0.1000" / Resolution: 0.0001" (0.013 - 2.540 mm / Resolution: 0.001 mm) |
Max Coating | 0.100" (2.54mm) |
Resolution: | .001 inches (0.01mm) |
Velocity Range: | .0492 to .3936 in./ms 1250 to 9999 meters/sec |
Units: | Inch or mm |
Measurement Modes: | - Pulse-Echo (corrosion mode) - Pulse-Echo Coating (Corrosion w/o coating) - Echo-Echo (thru-paint) - Temp Comp (auto adjust for material temp) - Coating Only (Ultrasonic Coating Gauge) |
Transducer Types: | Dual Element (1 to 10 MHz). |
Output | RS-232 for upload/download of setups |
Memory capacity: | TI-CMX: None TI-CMXDL: over 200,000 measurements |
Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells |
Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
Auto Power off: | After 5 minutes of non-use |
Display: | 1/8 in. VGA grayscale display 62 x 45.7mm |
Keyboard: | Membrane switch with twelve tactile keys |
Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) Material: -0 to 200° F (-20 to 100° C) Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures |
Weight, net: | 383 grams |
Dimensions: | 63.5 W x 165 H x 31.5 D mm |
Warranty: | 2 Year Warranty for Gauge (90 days for probe) |
Certification: | CE Approved, Factory calibration traceable to national standards |
Item | Description | Price | ||
---|---|---|---|---|
TI-CMX-WOP | TI-CMX Combination Coating & Wall Thickness Gauge without a probe | $1,815.00 | ||
Accessories | ||||
Protective Rubber Boot for Tall Format Ultrasonic Thickness Gauges | $115.00 | |||
Protective Holder for Long Body UT Gauges, F-149-0001 | $85.00 | |||
V-Block Transducer Holder (For 3/16" & 1/4" Transducers only), F-000-7001 | $170.00 | |||
SoundSafe Coupling Fluid - 12 oz / 354 ml - NSN: 6635-01-553-0559 | $30.00 | |||
Sono 600 High Temp Coupling Fluid 4 oz / 118 ml (0 - 700 F / -18 to 371 C) | $78.00 | |||
High Temp Coupling Fluid 4oz (600 - 780 F / 316 - 404 C) | $150.00 | |||
1/4" diameter, 5.00 MHz Coating Probe (Standard Probe for TI-CMX) | $360.00 | |||
1/2" diameter, 5.0 MHz dual element transducer, coating thickness capabable, Side in, Potted | $375.00 | |||
1/2" diameter, 3.5 MHz Coating Transducer | $375.00 | |||
T-102-2900-H | 1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C) | $395.00 | ||
3/16" diameter, 5 MHz Coating Thickness transducer, Side In, Potted | $360.00 | |||
T-101-3900 | 3/16" diamenter, 7.5MHz dual element transducer, Side in, Potted | $360.00 | ||
1/4" diameter, 5.0 MHz dual element transducer Hi-Temp (900 F/500 C) Top in, Microdot | $470.00 | |||
1/2" 5 Mhz Hi Damp Coating Probe with 50 ft. underwater cable | $705.00 | |||
BATT-RC4AA-WC | 4-pack AA Ni-MH Rechargeable Batteries & Charger Kit | $35.00 |