The Series 7i professional digital force / torque indicator is designed to work with a wide range of our remote force and torque sensors. With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensor's smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other indicators.
The Series 7i features an industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. In addition to the 5i indicator's functions, the Series 7i features high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The Series 7i also features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient of friction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications. For productivity enhancement, the indicator also features automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection.
The Series 7i interfaces with our motorized test stands to permit functions such as break testing, dynamic load holding, PC control capability, and more. The included MESURTM Lite data acquisition software tabulates continuous or single point data. Data saved in the indicator's memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.
The Series 7i features an industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. In addition to the 5i indicator's functions, the Series 7i features high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The Series 7i also features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient of friction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications. For productivity enhancement, the indicator also features automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection.
The Series 7i interfaces with our motorized test stands to permit functions such as break testing, dynamic load holding, PC control capability, and more. The included MESURTM Lite data acquisition software tabulates continuous or single point data. Data saved in the indicator's memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.
- Includes 10 pt NIST Traceable Calibration Certificate
- Interchangeable force and torque sensors through Plug & Test™ technology
- Password protection for individual keys and calibration
- USB, RS-232, Mitutoyo, and analog outputs
- NEW! 500 Hz max data output rate
- Individual data point memory for up to 5,000 readings, downloadable to a PC
- Automatic output / data storage / zeroing upon various event completions
- 5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name
- Programmable set points, with indicators and outputs
- External trigger mode - for switch contact testing or remotely stopping display update
- Sensor password protection, for preventing use of an unauthorized sensor
- High-speed 14,000 Hz sampling rate
- Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC
- Sample break detection with auto functions, including stopping movement of compatible motorized test stand
- 1st / 2nd peak detection
- Programmable footswitch command string
- Averaging mode - calculates average readings over time
- Made in the USA
- 3-Year Warranty
Series 7 gauges feature several functions typically found in more complex instruments, such as materials testers, data acquisition systems, and PLCs. The following unique features are highlighted:
High Speed Data Capture & Storage>
Series 7 can capture and store up to 5,000 continuous data points at a rate of up to 14,000 readings per second. This unique function is ideal for capturing switch activation forces, sharp breaks, and other short-duration applications. Configurable start and stop triggers are provided. The data acquisition rate is variable and can be slowed to also capture longer events, such as structure relaxation, material expansion, and others.
Data from the storage buffer can be exported to data collection software such as MESURTMgauge for further analysis and graphing. Using a Series 7 gauge could replace cumbersome and expensive data acquisition hardware and software. |
Footswitch Command String
Integrate your footswitch / automation system with a Series 7 gauge to improve testing ergonomics and efficiency; no need for multiple key presses. Up to three steps may be programmed for a single footswitch activation.
Select from several commands, including request peak reading, zero the display, save to memory, and others. Time delays can be inserted between each step. |
Automatic Data Output / Save / Zero / I/O Pin Toggle
Upon completion of several event types, the Series 7 can perform the following productivity-enhancing functions:
|
User-defined Unit of Measurement
Series 7 gauges display 6 standard units of measurement. One additional user-defined unit is provided for unique applications. A base unit is specified, along with a multiplier, and 5-character name. Typical applications:
- To measure the torque produced by pressing on a lever in a mechanical assembly, configure the multiplier based on the length of the lever, thereby converting a unit such as N into Ncm. - To measure the pressure produced by a circular compression plate on a foam sample, configure the multiplier based on the area of the plate, thereby converting a unit such as lbF into psi. |
| Model | Description |
|---|---|
R01
|
Rugged "S-beam" force sensor |
R02
|
Compression Force Sensor |
R03
|
Tension and Compression Force Sensor |
R04
|
Miniature S-Beam Force Sensor |
R05
|
Measures push and pull force |
R50
|
Universal Torque Sensor |
R51
|
General torque testing |
R52
|
Torque tool testing |
R53
|
Closure, bottle cap testing |
R55
|
Square Drive Torque Sensor |
The 7i includes a carrying case, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR Lite software, MESURgauge DEMO software, and user's guide), and certificate of conformance.
| Accuracy | ±0.1% of full scale + sensor |
| Sampling rate | 14,000 Hz |
| Power | AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low. |
| Battery Life | Backlight on: up to 7 hours of continuous use Backlight off: up to 12 hours of continuous use |
| Outputs | USB / RS-232: Configurable up to 115,200 baud. Includes Gauge Control Language 2 for full computer control. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices. Analog: ±1V DC, ±2% of full scale at capacity. General purpose: Three open drain outputs, one input. Set points: Three open drain lines. |
| Configurable Settings | Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibration |
| Safe overload | 150% of full scale (display shows "OVER" at 110% and above) |
| Weight | Weight: 0.7 lbs (0.3 kg) |
| Warranty | 3 years |
| Item | Description | Price | ||
|---|---|---|---|---|
M7IU | Force/torque indicator, 220V UK Plug | $1,425.00 | ||
| Accessories | ||||
STAND, TABLE TOP, INDICATOR/TORQUE GAUGE | $175.00 | |||
MESUR gauge Load & Travel Analysis Software - NO LONGER AVAILABE, Order Mesurgage Plus - Please contact us for pricing and availability. | $ | |||
AC1118 | Spare rechargeable battery for M-10 Gauges, old PN 08-1026 | $20.00 | ||
AC1109 | Serial Output Cable DB9 for M10 Force / Torque Gauges, old PN 09-1163 | $80.00 | ||
AC1108 | Interface cable, gauge to test stand controller, coiled, 32" retracted, old PN 09-1162 | $135.00 | ||
AC1112 | Analog cable, gauge to dual banana plug, old PN 09-1166 | $80.00 | ||
AC1051 | Footswitch for Series 7 / 7i | $205.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
