500 Series for 500mm Jaw Depth (20")
Measuring Range:
0 - 10 mm (0 - 0.400") or 0 - 25 mm (0 - 1.000")Resolution: 0.01 mm (0.001")
The MTT-10 is a digital dial thickness gauge designed for the accurate thickness measurement of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. It is offered with two different jaw depths providing clearance to measure wide samples. The combination of feeler diameter and load weight generates a specific pressure as required by many standardized test standards necessary in order to get reliable and repeatable measurements such as fabric, felt, textiles, and similar compressible materials.
The feeler shape and the pressure are corresponding to DIN EN ISO standards, however, this low-cost thickness gauge is suitable for quick comparison measurements and does not strictly conform to the standard.
| Type | Standard | Application | Feeler Ø | Feeler shape cm² |
Pressure |
| T | similar to DIN EN ISO 5084 | Textiles and Non-woven textiles | 50.42 | 20 | 1 kPA |
| V | similar to DIN EN ISO 9073-2 | Standard fleece | 56.42 | 25 | 0.5 kPA |
| L | similar to DIN EN ISO 2589 / 53326 | Leather | 10 | 0.785 | 50 kPA |
| G | similar to DIN EN ISO 964- | GeoMaterials | 56.42 | 25 | 2 kPA |
| Measuring Range | 0 - 10 mm (standard) or 0 - 25 mm (optional) |
| Resolution | 0.01 mm |
| Accuracy | ± 0.02 mm |
| Depth of Jaws | 300 mm (300 Series) 500 mm (500 Series) |
| Display | LCD 4 Digit, 8 mm tall |
| Pressure | Refer to table below (gauge, feeler, weight) |
| Feeler shape | 50.5 mm Ø = 20 cm² 56.42 mm Ø = 25 cm² |
| Item | Description | Price | ||
|---|---|---|---|---|
MTT-10-300-L | Digital Thickness Gauge, 0-10mm for LEATHER with 300 mm Jaw Depth | $645.00 |
