Series F force test systems are designed for tension and compression force testing applications, with force capacities up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.
Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.
Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:
- Limit testing to a load, break, or distance
- Height measurement
- Load holding
- Cycle testing
- Multi-step testing, utilizing any combination of the above functions
Run a test via the Graph or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Individual runs may be invalidated if, for example, the sample slips out of the grips, or the test was interrupted.
Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.
- Load Limit
- Distance Limit
- Break Limit
- Load Hold
- Cycle
- Move to load
- Move to distance
- Move to break
- Hold a load or position
- Hold a load or position
- Loop / cycle
- Datum
- Prompts
- Save current load or position
- Zero load or position
- Return to Home position
| F755 | F755S | F1505 | F1505S | |
|---|---|---|---|---|
| Load capacity1: | 750 lbF [3.4 kN] |
1,500 lbF [6.7 kN] |
||
| Maximum travel: | 32.0 in [813 mm] |
14.2 in [360 mm] |
32 in [813 mm] |
14.2 in [360 mm] |
| Speed range: | 0.001 - 60 in/min [0.02 - 1,525 mm/min] |
0.001 - 70 in/min [0.02 - 1,800 mm/min] |
||
| Load accuracy (% of full scale) |
|
|||
| Speed setting accuracy: | ±0.2% | |||
| Load sampling rate: | 20,000 Hz | |||
| Data acquisition rate: | 1,000 Hz | |||
| Speed accuracy: | ±0%, stepper motor driven | |||
| Distance accuracy: | ±0.002 in [0.05 mm], factory-compensated at up to full load | |||
| Distance resolution: | 0.0005 in [0.01 mm] | |||
| Limit switch repeatability: | ±0.001 in [0.03 mm] |
|||
| Overload protection: | Motor stops at 120% of full scale of the force sensor | |||
| Power: | Universal input 100-240 VAC, 50/60 Hz, 300W | Universal input 100-240 VAC, 50/60 Hz, 450W | ||
| Fuse type: | 4A, 3AG, SLO BLO | |||
| Weight (test frame only): | 184 lb [83 kg] |
149 lb [68 kg] |
197 lb [89 kg] |
157 lb [71 kg] |
| Shipping weight: | 235 lb [107 kg] |
195 lb [88 kg] |
247 lb [112 kg] |
205 lb [93 kg] |
| Environmental conditions: |
|
|||
| Warranty: | 3 years [see individual statement for further details] | |||
| Conformance: | CE | |||
1. Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
2. May be extended via single- or double-column extensions.
| Item | Description | Price | ||
|---|---|---|---|---|
F755S-IMT | Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN | $14,877.00 | ||
| Accessories | ||||
NIST-traceable certificate of calibration, distance and speed | $395.00 | |||
Safety Shield For Test Frames, 51.9" height | $3,619.50 | |||
Safety Shield For Test Frames, 34.4" height | $3,220.50 | |||
AC1093 | USB hub for Series F | $295.00 | ||
AC1085 | Control panel tabletop mounting kit | $200.00 | ||
DC6000 | Replacement tablet control panel, Series F, pre-installed w/IntelliMESUR®, w/test frame mounting hardware | $9,100.00 | ||
