The EDxtreme exemplifies the trademark precision and rugged construction of Dillon dynanometers. Its highly refined design draws on the inherent strengths of premium-grade materials to achieve a 5:1 minimum factor of safety.
While the EDxtreme may be configured for something as simple as a digital hanging scale, it offers a higher level of intelligence. With user-defined functions and sophisticated communication options, the EDxtreme readily adapts to multi-tasking operations or multi-link systems capable of monitoring a series of critical stress points from a single locations - it is the definition of application versatility.
Xtreme Engineering
Building a precision instrument that can survive real-world punishment requires masterful engineering. This is where Dillon's experience shines through. The engineers assigned to the EDxtreme drew on a depth of industrial application knowledge and conducted exhaustive materials testing to achieve the highest structural integrity.
- Superior strength and corrosion resistance - High capacity models are constructed of electroless nickel-plated aircraft-quality alloy steel. Lower capacity models are anodized aircraft-quality aluminum
- 5:1 factor of safety - This measure of strength and safety is maintained at all capacities. Computer modeling confirms the low stress and long product life that is inherent in the EDxtreme design.
- Retained hardware - Allows permanent attachment of centering spacers, which eliminates fumbling during high capacity rigging.
- NEMA6P/IP68 - The EDxtreme is clearly the choice for reliability in any environment - in-plant or out on the job site.Dustproof as well as protected against continuous immersion in water.
Xtreme Accuracy: 0.1%
High resolution and accurate repeatable readings are essential to proper weighing. The higher standards set for the EDxtreme meant taking the time to ensure that material characteristics, load element design and strain gage meshed perfectly. The result of that effort is a typical accuracy of 0.1% of full scale capacity. The enhanced resolution mode of 1 part in 5000 provides the level of readability needed for refined weighing.
Xtreme Ease
- Exclusive SOFTKEY interface -Dillon has eliminated confusing menus for faster setup and simple operation. IN addition to lbf, kgf and Newtons, programmable functions can correct for gravitational variations and allow the use of custom units of measurements.
- Wide-angle LCD -Provides improved readability over a wider viewing angle and is available with back lighting for low light conditions.
- Battery operation -The EDxtreme is powered by two standard C-cell batteries. Batteries are easily accessible for fast replacement.
NIST Traceable - The EDxtreme comes with a NIST traceable calibration certificate.
- NIST Traceable Certificate Included
- RS232 or USB Output
- Capacities from 2,500-550,000lb (1,000-250,000kg)
- 0.1% accuracy
- NEMA6P/IP68 rated housing is protected against continuous immersion in water.
- High strength case resists heavy blows
- Largest safety factor for overload protection and long life
- Generous shackle openings mate with most hooks and hardware
- Optional Radio-ready option connects EDX to the EDX-COMM-II Remote Indicator (Standard on 50T and higher models)
- CE Certified
- 2 Year Warranty
- Made in the USA
- Includes Carrying Case.
| Model | Capacity | Std. Res.* | Enh. Res.* | Body Construction |
|---|---|---|---|---|
| EDx-1T | 2,500 lbf 1,000 kgf 10,000 N | 2 1 10 | 0.5 0.2 2 | Aircraft quality 2024 Aluminum 700% overload max. |
| EDx-2T | 5,000 lbf 2,000 kgf 20,000 N | 5 2 20 | 1 0.5 5 | Aircraft quality 2024 Aluminum 700% overload max. |
| EDx-5T | 10,000 lbf 5,000 kgf 50,000 N | 10 5 50 | 2 1 10 | Aircraft quality 2024 Aluminum 700% overload max. |
| EDx-10T | 25,000 lbf 10,000 kgf 100,000 N | 20 10 100 | 5 2 20 | Aircraft quality E4340 Alloy Steel 500% overload max. |
| EDx-25T | 55,000 lbf 25,000 kgf 250,000 N | 50 20 200 | 10 5 50 | Aircraft quality E4340 Alloy Steel 500% overload max. |
| EDx-50T | 100,000 lbf 50,000 kgf 500,000 N | 100 50 500 | 20 10 100 | Aircraft quality E4340 Alloy Steel 500% overload max. |
| EDx-75T | 160,000 lbf 75,000 kgf | 100 50 | 50 20 | Aircraft quality E4340 Alloy Steel 400% overload max. |
| EDx-100T | 220,000 lbf 100,000 kgf | 200 100 | 50 20 | Aircraft quality E4340 Alloy Steel 400% overload max. |
| EDx-150T | 330,000 lbf 150,000 kgf | 200 100 | 100 50 | Aircraft quality E4340 Alloy Steel 400% overload max. |
| EDx-250T | 550,000 lbf 250,000 kgf | 500 200 | 200 50 | Aircraft quality E4340 Alloy Steel 400% overload max. |
*Std. Res. = Standard Resolution
*Enh. Res. = Enhanced Resolution
*Enh. Res. = Enhanced Resolution
| Enclosure | Designed to NEMA6P/IP68 Suitable for continuous outdoor use (waterproof). |
| Accuracy | 0.1% of capacity up to EDx-50T 0.3% of capacity for EDx-75T and above |
| Repeatability | .1% of capacity up to EDx-50T 0.3% of capacity for EDx-75T and above |
| Proof load | 150% of capacity up to EDx-75T. 110% of capacity EDx-100T and above. |
| Safe Overload | 200% of capacity |
| Body Protection | NEMA6P/IP68 rated housing is protected against continuous immersion in water. |
| Bearings | Unmatched repeatability attained by needle bearings in shackle pin holes up to EDx-5T. Shackle pin acts as inner race. |
| Shackles | Forged industry standadrd anchor shackles. Models up to EDx-5T use precision machined shackle pin. Higher capacities use bar stock pin. |
| Display | 128 x 64 dot-graphic LCD display shows up to 6 digits 1.0" (26 mm) high plus annunciators and softkeys. Digits are .11 inches (3 mm) thick for unmatched readability. |
| Display update rate | 2 times per second |
| Peak Capture Rate | 10/100/1,000 Hz |
| RS-232 communication | Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character. |
| USB Output | Only offered on EDx-USB versions |
| Calibration | Traceable to the NIST. Certificate included with curve of readings. Passes only with threee consecutive confirming runs, with all points in specification. |
| Battery life | Stand alone EDXtreme with no radio and no backlight lasts up to 400+ hours. 150 hours continuous with Radio Link System. Use with two C-Cell alkaline batteries. (When using backlight, battery life will be reduced, depending on intensity.) |
| Operating Temperature | -4 F to 158 F (-20 to 70 C) |
| Calibration Certificate | NIST Certified Certificate Included |
| HS Code (for Export) | 9031.80.8085 |
| Warranty | 2 Years |
| Radio Specifications | |
|---|---|
| FCC Certified | For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.) |
| Frequency | ISM 2.4 GHz frequency band operates between 2.4 to 2.4835 GHz |
| Output Level | 10 mW (10 dBm) |
| Display Update Rate | 1 time per second |
| Number of Links Remote Can Control | Up to 15 addresses |
| Configuration Address | Automatic and configurable |
| Antenna | Integral antenna |
| Range | Open-air range up to 600 feet, line-of-sight. Indoor range dependent upon environment with 300 feet common. Low power radio systems are dependent upon interference levels from other radio systems and environmental conditions. Radio devices are not suitable for all applications |
| Item | Description | Price | ||
|---|---|---|---|---|
AWT05-506307 | EDx-50T EDxtreme Digital Dynamometer radio ready with two shackles - 100,000 lbf | $11,395.00 | ||
| Accessories | ||||
EDX-COMM-II Communicator II with radio and backlight | $1,865.00 | |||
AWT20-508223 | Protective rubber sleeve, gray (recommended for outdoor applications) | $180.00 | ||
46631-0026 | Adapter, 9 to 25-pin to convert for use with 25-pin serial port | $10.00 | ||
AWT25-501123 | Power supply, 100-240 VAC to 5V for "Red" EDXtreme | $330.00 | ||
52697-0066 | WedgeLink Lite Software transfer data to a PC acting as an add-on | $140.00 | ||
AWT25-501124 | Power supply, 100-240 VAC/5V to RS-232 for "Red" EDXtreme | $560.00 | ||
AWT05-509279 | Data export pack, includes all cables and wedge software to send data from gauge to PC | $405.00 | ||
36057-0071 | Cable, Communicator II to EDXtreme RS-485 cable, 50-ft (15 m) | $345.00 | ||
36057-0022MTS | Cable, computer serial cable with 9-pin D connector, 12-ft (3.6 m) | $195.00 | ||
46631-0026 | Adapter, 9 to 25-pin to convert for use with 25-pin serial port | $10.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
Custom cable lengths available at $2.00 per foot (additional to any standard cable).
Serial cable limit of 50-ft, Communicator II cable limit of 200-ft.
Serial cable limit of 50-ft, Communicator II cable limit of 200-ft.
| Dillon P/N | Description |
| 36188-0032 | EDx-1T (2.5K) w/ 2 Shackles, Backlight |
| 36188-0040 | EDx-2T (5K) w/ 2 Shackles, Backlight |
| 36188-0057 | EDx-5T (10K) w/ 2 Shackles, Backlight |
| 36188-0065 | EDx-10T (25K) w/ 2 Shackles, Backlight |
| 36188-0073 | EDx-20T (50K) w/ 2 Shackles, Backlight |
| 36169-0035 | EDx-1T (2.5K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0043 | EDx-2T (5K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0050 | EDx-5T (10K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0068 | EDx-10T (25K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0076 | EDx-20T (50K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0084 | EDx-50T (100K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0126 | EDx-75T (160K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0092 | EDx-100T (220K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0118 | EDx-150T (330K) w/ 2 Shackles, Radio Ready, Backlight |
| 36169-0100 | EDx-250T (550K) w/ 2 Shackles, Radio Ready, Backlight |
