E2-D - E2 Durometer Type Shore D, for hard rubber & plastics

E2 durometers now feature an environmentally friendly magnesium alloy housing. E2 durometers are quick and easy to operate with a high degree of repeatability. Optional peak indicators are available on each model.

Hardness is an essential characteristic of rubber, elastomers and plastic products. Select the optimum durometer type based upon material hardness. E2 models are available in Durometer Types: Shore A, D, E and Asker C Hardness.

Features

Lightweight, durable, recyclable, magnesium-alloy case
Includes 3-Point Calibration certificate traceable to NIST
Available in Shore A, D, E (ASTM D2240 compliant) and Asker C hardness scales

Durometer Selection

Model	Scale	Indentor	Material	Standard	Measuring Force
E2-A	Shore A	Flat point	Normal rubber	ASTM D-2240	1 kgf
E2-D	Shore D	Cone point	Hard rubber & plastic	ASTM D-2240	5 kgf
E2-E	Shore E	Hemispherical	Soft rubber	ASTM D-2240	5 kgf
E2-C	Asker C	Hemispherical	Soft rubber	JIS K-7312	1 kgf

Operation

As the durometer is pressed against the sample, the material resistance force and indentor spring load balance. The depth of the indentor is measured, which provides a measure of the material’s hardness. Values are based upon a 100 point scale (accuracy ±1 point). However, as time elapses the indicator will "creep" back so that a reading taken a few seconds after the indentor makes contact with the sample will be less than the peak reading. Asker durometers offer a peak indicator as an option to more closely monitor the difference between peak and "creep".

E2 Druometer Operation