PosiTest
Easy to use Coating Thickness Gauge for Automotive and other common applications
Measuring Range:
0-40 mils (0-1000um)
0-40 mils (0-1000um)
Zero or 1 Point Calibration Adjustment for complex applications
Strong, wear resistant, ruby-tipped probe
Manual Adhesion Tester
Measures adhesion of coatings over metal, wood, concrete, plastic and other substrates
Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12
Automatic Adhesion Tester
Electronically controlled hydraulic pump applies smooth and continuous pull-off pressure at a user-specified rate
Conforms with ASTM D4541 / D7234, ISO 4624, SSPC-CS 23.00/AWS C2.23/NACE No. 12
Magentic Coating Thickness Gauge - Banana Gauge
Measuring Range : 2 Ranges available up to 80mils (200 µm)
Explosion Proof - Refinery safe
Low voltage Pinhole Detector
Lightweight, ergonomic design - while most other devices are box-shaped, the PosiTest LPD was specifically designed to fit comfortably in the hand with a balanced weight distribution
4 voltage output options conform to international standards
Easy to use Coating Thickness Gauge for Automotive and other common applications
Measuring Range:
0-40 mils (0-1000um)
0-40 mils (0-1000um)
Keypad-selectable units: Mils or Microns
Reversible display for inverted use
Suitable for outdoor use
Interchangeable stand-off allows a PosiTest ATM50 or ATA50 to pull 10, 14 and 20 mm dollies.
Ideal for high bond strength finishes such as coatings on metal.
Interchangeable stand-off allows a PosiTest ATM20 or ATA20 to pull 50 mm dollies.
Ideal for lower bond strength finishes such as coatings on wood, concrete and plastic.
Ideal for measuring the tensile strength of concrete surfaces and concrete repairs and overlay materials
Conforms to ASTM C1583
Ideal for measuring the tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives
Conforms to BS EN 12004-2
Loading fixtures, stubs for adhesion testing
10 mm Dollies, 14 mm Dollies, 20 mm Dollies, 50 mm Dollies, 50 mm C1583 Dollies, 50 mm² Tile Dollies, 50 mm² Plate
Loading fixtures, stubs for adhesion testing
Larger quantity of dollies at a reduced cost
Additional glue, mixing sticks, palettes and cotton swabs.
Drilling template and drill bits to isolate test area, ideal for thicker coatings on concrete.
Includes (10) drill bits 5/32" (4 mm)
