Travel - 14.2in / 360mm
F755S - 750 lb / 3.4 kN
F1505S - 1500 lb / 6.7 kN
Travel - 32in / 813mm
F1505 - 1500 lb / 6.7 kN
F755- 750 lb / 3.4 kN
Load Cell and Grips Sold Separately
Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.
Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.
Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.
Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.
Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.
Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.
- 3 Year Warranty
- Easy-To-Use Touch Screen Controller
- Adjustable upper and lower solid state limit switches
- Easy-to-service electronics
- Position accuracy of ±0.006 in / 0.15 mm under any load, at any position
- Smooth, quiet operation, with virtually no speed variation under load
- The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place.
| F755-EM | F755S-EM | F1505-EM | F1505S-EM | |
|---|---|---|---|---|
| Load capacity*: | 750 lbF [3.4 kN] |
1,500 lbF [6.7 kN] |
||
| Maximum travel: | 32.0 in [813 mm] |
14.2 in [360 mm] |
32 in [813 mm] |
14.2 in [360 mm] |
| Standard speed range: | 0.5 - 24 in/min [10 - 600 mm/min] |
|||
| Optional speed range: | 0.001 - 60 in/min [0.02 - 1,525 mm/min] |
0.001 - 70 in/min [0.02 - 1,800 mm/min] |
||
| Load accuracy (% of full scale) |
|
|||
| Load sampling rate: | 5,000 Hz | |||
| Data acquisition rate: | 100 Hz | |||
| Speed accuracy: | ±0.2% of setting, virtually no variation with load | |||
| Position accuracy: | ±0.006 in [0.15 mm], at any load or position | |||
| Distance resolution: | 0.001 in [0.02 mm] | |||
| Limit switch repeatability: | ±0.001 in [0.03 mm] | |||
| Overload protection: | Motor stops at 120% of full scale of the force sensor | |||
| Power: | Universal input 100-240 VAC, 50/60 Hz, 300W | Universal input 100-240 VAC, 50/60 Hz, 450W | ||
| Fuse type: | 4A, 3AG, SLO BLO | |||
| Weight (test frame only): | 184 lb [83 kg] |
149 lb [68 kg] |
197 lb [89 kg] |
157 lb [71 kg] |
| Shipping weight: | 235 lb [107 kg] |
195 lb [88 kg] |
247 lb [112 kg] |
205 lb [93 kg] |
| Environmental conditions: |
|
|||
| Conformance: | CE, UKCA | |||
| Warranty: | 3 years [see individual statement for further details] | |||
The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one convenient place. Use the 7” touchscreen to create and run a wide range of tests, including:
- Test to a load
- Test to a sample break
- Test to a distance
- Load holding
- Cycle testing
- Average force testing
View data in graphical format or results tables. Save or export data as needed, or generate a report.
What's your point of view?
Run a test via the Standard, Graph, or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples.
Standard View
View large-format load and distance values, with pass/fail status.
Graph View
View a graph of load vs. distance or time, with pass/fail status.
Results View
View results for each run, with corresponding statistics for the results.
Test setup is easy as 1-2-3
Basic tests
Select a test type, and EasyMESUR® will guide you through the setup.
Load Limit
Distance Limit
Break Limit
Load Hold
Cycle
Averaging
1. Basic Test Settings
- Test direction
- Speed
- Test-specific parameters
- Data save preferences
2. Results Settings
- Select results
- Enable and configure pass/fail limits
- Set data collection rate
- Set auto-return to home
3. Graph Settings
- Single-point vs. continuous graphing
- Set force vs. time or vs. distance
- Graphing start threshold
Robust data acquisition and management
Blazingly fast
Force sensor sampling rate of 5,000 Hz yields accurate peak measurements even in quick-duration events. EasyMESUR® collects load and travel data at up to 100 Hz, and allows up to 100,000 data points per run.
Customizable reporting
Print or create a PDF report, including results, statistics, graph, system and user information, and comments.
Create report templates to save with future reports.
Save or export data
Automatically or manually save individual runs and results to a USB drive or file location of your choice. File names are automatically generated with the test name and time stamp, for quick searchability.
Results sets and data from individual runs may also be exported as .csv files.
Intelligent manual control
Manually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets, and FollowMe® force-based positioning.
Push and pull on the force sensor to move the crosshead. Apply greater load to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments.
Calibrate force sensors on the test frame or off-site
Calibrate force sensors in one of two ways:
Test frame
EasyMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces.
Off-site
Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator (requires optional AC1083 adapter).
Secure user access
Control user access to sensitive areas, such as test editing and calibration, via password.
| Standard speed range | 0.5 - 24 in/min - 10 - 600 mm/min |
| Optional speed range | 0.02 – 45 in/min - 0.5 – 1,100 mm/min |
| Load accuracy | Test frame: ±0.1%* |
| Load sampling rate | 5,000 Hz |
| Data acquisition rate | 100 Hz |
| Speed accuracy | ±0.2% of setting, virtually no variation with load |
| Position accuracy | ±0.006 in / 0.15 mm, at any load or position |
| Distance resolution | 0.001 in / 0.02 mm |
| Limit switch repeatability | ±0.001 in / 0.03 mm |
| Power | Universal input 100-240 VAC, 50/60 Hz, 120W |
| Warranty | 3 Years |
| Weight (test frame only) | Refer to PDF brochure (in downloads section) |
| Shipping weight | Refer to PDF brochure (in downloads section) |
| Dimensions | Refer to PDF brochure (in downloads section) |
- F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
- F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min
See PDF Brochure for additional specifications
| Item | Description | Price | ||
|---|---|---|---|---|
F755S-EM | Test frame with EasyMESUR® control panel, vertical, short, 750 lbF / 3.4 kN | $8,193.75 | ||
| Accessories | ||||
| Optional Functions | ||||
EMF001-2 | Distance Measurement Option for EasyMESUR-HR Test Stand | $1,748.00 | ||
EMF002-2 | Distance Limits for EasyMESUR-HR Test Stand | $655.50 | ||
EMF003-2 | EMF003-2 for EasyMESUR-HR Stands | $655.50 | ||
EMF004-2 | High Speed Extension for EasyMESUR-HR Test Stand | $546.25 | ||
EMF005-2 | Low Speed Extension for EasyMESUR-HR Test Stand | $546.25 | ||
EMF006-2 | Cycling Option for EasyMESUR-HR Test Stand | $712.50 | ||
EMF007-2 | Break Detection for EasyMESUR-HR Test Stand | $712.50 | ||
EMF008-2 | Load Holding for EasyMESUR-HR Test Stand | $712.50 | ||
EMF009-2 | FollowMe for EasyMESUR-HR Test Stand | $494.00 | ||
EMF010-2 | Graphing & Reporting for EasyMESUR-HR Test Stand | $1,529.50 | ||
EMF011-2 | PC Control for EasyMESUR-HR Test Stand | $2,075.75 | ||
EMF012-2 | Coefficient of Friction (COF) Measurement for EasyMESUR-HR Test Stand | $712.50 | ||
EMF013-2 | Spring Rate Measurement for EasyMESUR-HR Test Stand | $712.50 | ||
| Optional Function Packages | ||||
EMP001-2 | Distance Measurement Package for EasyMESUR-HR Stands | $2,897.50 | ||
EMP002-2 | Speed Extension Package for EasyMESUR-HR Stands | $1,035.50 | ||
EMP003-2 | Advanced Functionality Package for EasyMESUR-HR Stands | $2,512.75 | ||
EMP-COMP-2 | Complete Options Package (All functions) for EasyMESUR-HR Stands | $9,286.25 | ||
USB communication adapter connects EasyMESUR® control panel to a PC for data collection by a third-party / SPC Software | $350.00 | |||
