Series F force test systems are designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.
Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.
Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including:
- Limit testing to a load, break, or distance
- Height measurement
- Load holding
- Cycle testing
- Multi-step testing, utilizing any combination of the above functions
Run a test via the Graph or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Individual runs may be invalidated if, for example, the sample slips out of the grips, or the test was interrupted.
Basic tests - Select a test type, and IntelliMESUR® will guide you through the setup.
- Load Limit
- Distance Limit
- Break Limit
- Load Hold
- Cycle
- Move to load
- Move to distance
- Move to break
- Hold a load or position
- Hold a load or position
- Loop / cycle
- Datum
- Prompts
- Save current load or position
- Zero load or position
- Return to Home position
| Model | Test Frame Capacity* | Maximum Travel |
|---|---|---|
| F105 | 100 lbF / 0.5 kN | 18.0 in / 457 mm |
| F305 | 300 lbF / 1.5 kN | 18.0 in / 457 mm |
| F505 | 500 lbF /2.2 kN | 18.0 in / 457 mm |
| F505H | 500 lbF /2.2 kN | 18.0 in / 457 mm |
– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min
| Maximum travel | 18.0 in / 457 mm |
| Speed range | 0.02 – 45 in/min /0.5 – 1,100 mm/min |
| Load accuracy (% of full scale) | Test frame: ±0.1% Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15% |
| Load sampling rate | 20,000 Hz |
| Data acquisition rate | 1,000 Hz |
| Speed accuracy | ±0.2% of setting, virtually no variation with load |
| Distance accuracy | ±0.002 in [0.05 mm], factory-compensated at up to full load |
| Distance resolution | 0.0005 in / 0.01 mm |
| Limit switch repeatability | ±0.001 in / 0.03 mm |
| Power | Universal input 100-240 VAC, 50/60 Hz, 300W |
| Fuse type | 1.2 A, 250V, 3AG, SLO BLO |
| Weight (test frame only) | F105/F305: 60 lb / 27 kg F505/F505H: 70 lb / 32 kg |
| Shipping weight | F105/F305: 75 lb / 34 kg F505/F505H: 85 lb / 39 kg |
| Temperature range | 40 – 95°F / 5 – 35°C |
| Humidity range | up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing |
| Conformance | CE |
| Warranty | 3 years |
| Dimensions | Refer to PDF Brochure for Dimensions |
| Item | Description | Price | ||
|---|---|---|---|---|
F505-IMT | Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 500 lbF / 2.2 kN - FORCE SENSOR SOLD SEPARATELY | $12,967.50 | ||
| Accessories | ||||
| Test Stand Optional Functions | ||||
IMF001 | COF testing module for IntelliMESUR® | $550.00 | ||
IMF002 | Materials testing calculations module for IntelliMESUR | $3,000.00 | ||
| Test Stand Accessories | ||||
NIST-traceable certificate of calibration, distance and speed | $395.00 | |||
Safety Shield For Test Frames, 51.9" height | $3,619.50 | |||
Safety Shield For Test Frames, 34.4" height | $2,669.50 | |||
AC1093 | USB hub for Series F | $295.00 | ||
AC1085 | Control panel tabletop mounting kit | $200.00 | ||
DC6000 | Replacement tablet control panel, Series F, pre-installed w/IntelliMESUR®, w/test frame mounting hardware | $9,100.00 | ||
| Column Extensions | ||||
Single column extension, 6 in / 150 mm, F105 / F305 / F505 / F505H | $440.00 | |||
Single column extension, 12 in / 300 mm, F105 / F305 / F505 / F505H | $610.00 | |||
Single column extension, 24 in / 600 mm, F105 / F305 / F505 / F505H | $770.00 | |||
Double column extension, 6″ / 150 mm, F105 / F305 / F505 | $1,925.00 | |||
Double column extension, 12″ / 300 mm, F105 / F305 / F505 | $2,200.00 | |||
Double column extension, 24″ / 600 mm, F105 / F305 / F505 | $2,472.00 | |||
