The G1110 puncture fixture is designed for determining the puncture resistance of plastic films and other materials up to 1,000 lbF (5 kN), in conformance with ASTM D5748.
The fixture’s generous height accommodates materials with long elongation. Four toggle clamps and a compression ring with concentric ridges effectively secure the material, while the included plunger with ball probe stretches and ruptures the sample.
Includes integrated eye end mounting for both the fixture and probe. Both ends require eye end adapters to mount to M10 force gauges or force sensors.
Compatible with the ESM750 and ESM1500 motorized test stands (Sold Separately)
- Secures materials for puncture testing, as per ASTM D5748
- Generous head room accommodates materials with long elongation
- Includes fixture assembly, sample compression ring, puncture plunger, and (2) anchor pins
- Compatible with Motorized Force Test Stand Models, ESM750, ESM1500, F755, F1505.
| Capacity | 1,000 lbF (5 kN) |
| Mounting | Includes integrated eye end mounting for both the fixture and probe. (Eye end adapters to mount force gauge or sensor SOLD SEPARATELY |
| Test Stands | Compatible with the ESM750 and ESM1500 motorized test stands |
| Weight | Fixture: 19.0 lb [8.6 kg] Probe: 0.4 lb [0.2 kg] |
The G1110 puncture fixture is shipped as shown at left, and includes the following accessories:
(1) Fixture assembly
(1) Sample compression ring
(1) Puncture plunger
(2) Anchor pin
