Measuring Range0.040 - 6.00 inches
1.00 - 150.0 mm
The Check-Line TI-25LT Ultrasonic Steel Thickness Gauge accurately measures steel thickness and the extent of corrosion - from only one side!
Standard configuration: In its standard configuration, the TI-25LT is factory set to MEASURE STEEL ONLY
Optional configuration: As a “no cost” option, the TI-25LT can be factory set to measure on stainless steel.
- Includes NIST-Traceable Calibration Certificate
- Resolution of 0.002 inch (0.01 mm)
- Large, backlit LCD display retains last reading
- Simple operator controls virtually eliminate training
- Special-purpose probes are offered for a variety of applications
- The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
- Switch-selected units for inches or mm
- For underwater surveying, probe cable lengths up to 50 feet are optional
- The TI-25LT probe is waterproof and can be submerged in water
- CE Certified
- Made in the USA with 5-Year Warranty
- IP 65 Rated
Complete Kit includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case.
| Minimum Radius for Convex Surfaces | 0.350" (8.89 mm) | |
| Minimum Radius for Concave Surfaces | 3" (76.2 mm) | |
| Minimum Headroom | 1" (25.0 mm) | |
| Minimum Sample Diameter | 0.150" (3.8 mm) | |
| Minimum Substrate Thickness - F | na | |
| Minimum Substrate Thickness - NFe | na |
| Range in Steel | 0.040-6.00" (1.00-150.0 mm) |
| Resolution | .004" (0.01mm) |
| Display | 4½ - Digit, 0.5" Backlit LCD |
| Velocity Range | .0787-.3937 in/µs (2000-10,000 m/sec) |
| Probe | 1/4", 5 MHz, actual wearface is 5/8" (17mm) |
| Probe Wearface | PEEK (Polyethylethylkytone) |
| Cable | 4ft. (1.2m) waterproof cable with non-polarized, quick-disconnect connectors. Op |
| Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available |
| Battery Type | Two AA batteries |
| Battery Life | 200 hours |
| Weight | 710 ounces (280g) |
| Dimensions | 2.5 x 4..5 x 1.25" (64 x 114 x 32mm) |
| Accessories | Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty | Gauge: 5 Years Probes: 90 Days |
| Item | Description | Price | ||
|---|---|---|---|---|
TI-25LT | Replaced by TI-25LTX Steel Only Ultrasonic Thickness Gauge Kit with T-102-2000 Probe | $ | ||
| Accessories | ||||
1/4" diameter, 5.00 MHz, dual element transducer (Standard Probe for TI-25LT) | $320.00 | |||
Protective Holder for Most TI Series Gauges, F-112-0005 | $60.00 | |||
SoundSafe Coupling Fluid - 12 oz / 354 ml - NSN: 6635-01-553-0559 | $30.00 | |||
V-Block Transducer Holder (For 3/16" & 1/4" Transducers only), F-000-7001 | $170.00 | |||
4 Step Steel Test Block, 0.1 / 0.2 / 0.4 / 0.6 inch - Uncertified, supplied in plastic case | $125.00 | |||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
