The Z2 has been replaced by the ZT Series, click here to go to the ZT Series Webpage.
7 Ranges up to 220lbs
Measures Push / Pull Force
The new Check-Line model Z2 is a high performance, digital force gauge which offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 1000 values in memory, which can be transmitted using the Digimatic or serial output ports. Use the real time mode to display load transients, or the peak mode to capture the peak force achieved during a test. Selectable measuring units of lbf, kgf, or Newtons.
Connect a Z2 force gauge with an MX Series test stand and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z2 force gauge, or maintain the force between the Z2 High and Low setpoints. Force control is ideal for fatigue or non-destructive testing.
- Ergonomically-designed, rugged die-cast aluminum housing
- "Zero Set" to zero the gauge in all operating positions (Tare)
- Operates on rechargeable NiCd batteries or AC adapter
- Overload protection 200 % full scale
- For hand-held use or mounting on test stands
-
Display can be reversed for inverted use: e.g. on teststands
- Output signals (RS 232 C, analog and Mitutoyo Digimatic)
- Quick display update rate of 20 times/s
- User selectable units: N, kgf (gf) and lb (oz)
- Easy to use
-
Selectable Modes
Real Time (to display load transients)
Peak Modes (to capture the peak force achieved during a test) - Supplied with NIST Calibration certificate
- ISO/IEC 17025 Long-form Certificate & Test Data is optionally available
- 2 Year Warranty
| Model | Capacity | Resolution |
|---|---|---|
| Z2-0.4 | 7.00 oz 200 g 2 N | 0.01 oz 0.1 g 0.001 N |
| Z2-1 | 18 oz 500 g 5 N | 0.01 oz 0.1 g 0.001 N |
| Z2-4 | 4.4 lb 2 Kg 20 N | 0.001 lb 0.001 Kg 0.01 N |
| Z2-11 | 11 lb 5 Kg 50 N | 0.01 lb 0.001 kg 0.01 N |
| Z2-44 | 44 lb 20 Kg 200 N | 0.01 lb 0.01 Kg 0.1 N |
| Z2-110 | 110 lb 50 Kg 500 N | 0.1 lb 0.01 kg 0.1 N |
| Z2-220 | 220 lb 100 Kg 1000 N | 0.1 lb 0.1 Kg 0.1 N |
| Displacement: | 0.2 mm |
| Accuracy: | ± 0.2% Full scale ± 1 digit |
| Selectable units | N, Kgf (gf), lb (oz) |
| Display: | 4 digit, 12 mm high |
| Overload capacity: | 200% Full scale, display flashes beyond 105% full scale |
| Zero adjustment (Tare) | 10% Full scale |
| A/D Converter: | 14 bit |
| Output signal: | RS 232 C (8, 1, N, 2400), analog ± 1 V DC, Mitutoyo Digimatic |
| Displacement at full scale capacity | 0.10 mm |
| Temperature range: | 32° to 100°F (0° to 40°C) |
| Air humidity: | 85% RH, max. |
| Low battery indicator: | Display flashes when battery is low |
| Power supply: | Rechargeable NiCd battery pack and/or 230 AC Adapter |
| Housing dimension: | 215 x 65 x 51 mm (L x W x H) |
| Weight, net (gross) | approx. 430 g (1300 g) |
| Warranty | 2 Years |
