Durometer according ISO 7619-1 for determining the Shore surface hardness of foams, steering wheels and inner linings of motor vehicles with hardness < 20 Shore A
- The spring loaded outer ring assures a constant measuring pressure and eliminates false readings due to difference between operators
- Working face 44.5 mm ⌀
- Application range < 20 Shore A units
- Flat bottom prevent tilting and improves the measuring accuracy
- Adjustable Min./Max. indicator marks to highlight working range of the hardness tester
- High repeatability
For measuring the hardness, the spring-loaded outer ring of the housing is pressed downwards until the edge of the ring meets the colored marking on the housing. This ensures a constant pressure and prevents measuring errors.
General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the test material has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
General:
The principle used to measure shore hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration is converted to hardness reading on a scale with 100 shore units.
As the depth of indentation is max. 2.5 mm the test material has to have a minimum thickness of 6 mm. If thickness is less stack some samples til you reach the required thickness.
Hardness tester with carrying case, Certificate of Compliance with the
order 2.1 according EN 10204 free of charge, operating instructions
| Indentor | Ball, 5 mm diameter (R=2.5mm) |
| Depth of indentation | 0 - 2.5 mm |
| Typical applications | Foams, steering wheels and inner linings of motor vehicles |
| Accuracy | ± 1 hardness unit |
| Application range | < 20 Shore A |
| Standard | ISO 7619-1 |
| Measuring spring force | 0.55 - 8.065 N |
| Test pressure* | Approx. 12.5 N |
| Scale diameter | 54 mm |
| Display range | 0 - 100 Shore AO units |
| Working face | 44.5 mm ⌀ = 15.5 cm² |
| Base plate | 44.5 mm ⌀ |
| Weight, net (gross) | Approx. 300 g (500 g) |
| Dimensions | 50 x 60 x 110 mm (LxWxH) |
* Spring load of outer ring to create constant pressure
| Item | Description | Price | ||
|---|---|---|---|---|
Shore AO Durometer conforming to ISO7619-1 Test Standard | $495.00 | |||
| Accessories | ||||
HP-MP | Memory Pointer Option for HP Durometer - K34010 | $100.00 | ||
PTS Durometer Test Stand - for HPSA/HPSD | $750.00 | |||
NISTCAL | NIST Traceable Calibration Certificate | $100.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
