Shore A Normal rubber
Shore D Hard rubber & plastics
Asker C Soft rubber
Asker F Urethane foam, sponge and polystyrene foam
Special Hardness Scales
Asker JA Normal rubber & softer plastics
Asker B Semi rigid rubber & plastics
Asker C2 Soft rubber & sponge Asker
Asker CS Polystyrene foam
Asker E Soft & cellular rubber Asker Hardness testers feature portable design, ease of operation, non-destructive measurement and optional peak indicators. Supplied with 3 point NIST traceable calibration cert. The Asker High Performance series has an accuracy of ±.75 point and is available in Type F for soft materials like sponge rubber and urethane foam. Asker models are available in ASTM D 2240 durometer Types: Shore A Hardness, Shore D Hardness and Asker C Hardness durometer scales.
Conforms to: JIS K 6253, JIS K 7215, ASTM D 2240, ISO 7619, ISO 868, DIN 53505
- Supplied with NIST Traceable Calibration Certificate (ISO 17025 Optional)
- High performance and accuracy
 |
Model F
Model FP
|
Exclusive type for foam materials, allowing measurement by placing the tester on the object of measurement. In addition to Model F, Model FP is available for powder puff. |
 |
Model C & Model C2
|
Model C is intended for hardness measurement of Soft Rubber, sponge, foamed elastomers, wound threads(yarn package), rolled films, potter's clay(kaolin) and other such soft materials. |
 |
Model CS
|
This features larger indentor and a more strong spring compared to Model C, thereby making it more suitable for polystyrene foam. |
 |
Model A
|
Has been used for wide applications since being standardized in the ISO. |
|
|
A hardness tester which conforms with the Japanese Industrial Standards JIS K 6301. One of the most popular types in Japan, but has recently been gradually replaced with the ISO-specified Type A. |
 |
Model JAL
|
Especially useful for recessed and/or smaller measurement areas. In addition to the standard Model JAL, long presser foot type are available for another Model applications. |
 |
Model B
|
It uses the same spring load used in Model A. It adopts a conical indentor similar to that of Model D, so as to be applicable to harder measuring objects than can be measured by Model A. It is useful for hardness measurement of unglazed pottery clay and ceramics in green condition. |
 |
Model JC
|
Model JC has those hardness testers described in JIS K 6301 as 'suitable for samples found to have a hardness value above 70 according to Model A'. It features higher resolution for hardness measurement of hard rubber. |
 |
Model D
|
Similar to Model A, this model is defined as 'Durometer Type D' as described in various domestic and international standards. It is in widespread use for hardness measurement of plastics and hard rubber. |
| Indication Range | 262 degree dial scale |
| Minimum indication | 1 point (Accuracy : ±1 point) |
| Pressure foot Dimensions | 44 x 18mm Rectangular |
| Outer Dimensions | Approx. 57 x 30 x 76 mm (W x D x H) |
| Mounting Thread | M6 P1 |
| Weight | 200 grams |
| Item | Description | Price | ||
|---|---|---|---|---|
X-A | Shore A Durometer - For Normal rubber | $731.50 | ||
| Accessories | ||||
RS-A | Reference Specimen (Test Blocks) Type A | $176.00 | ||
RS-C | Reference Specimen (Test Blocks) Type Asker C | $176.00 | ||
RS-D | Reference Specimen (Test Blocks) Type D | $176.00 | ||
ISO-17025 | ISO-17025 Accredited Calibration with Certificate | $220.00 | ||
