The Model X-C is available in nine capacities from 50 lb to 25,000 lb or 50 kg to 10,000 kg. Accuracy is ±1% of full range.
Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases. The ball is held in place with a spring clip or retainer. A threaded mounting hole is located opposite the loading ball in the bottom of the beam.
Proven accuracy and ruggedness sets our mechanical force gauge apart in the force measurement industry. The "D" shaped deflection beam is the heart of the X-C. Highly engineered materials with close machining tolerances and proper heat treatment provide optimum strength and spring characteristics.
Calibration is available in pounds or kilograms.
NIST Traceable Calibration Certificate is included.
24-month Limited Manufacturer's Warranty
Made in the USA
Load is applied against a hardened ball which rotates to maintain vertical alignment as pressure increases. The ball is held in place with a spring clip or retainer. A threaded mounting hole is located opposite the loading ball in the bottom of the beam.
Proven accuracy and ruggedness sets our mechanical force gauge apart in the force measurement industry. The "D" shaped deflection beam is the heart of the X-C. Highly engineered materials with close machining tolerances and proper heat treatment provide optimum strength and spring characteristics.
Calibration is available in pounds or kilograms.
NIST Traceable Calibration Certificate is included.
24-month Limited Manufacturer's Warranty
Made in the USA
| Model | Capacity | Resolution |
|---|---|---|
| 30386-0035 | 50 lb | 0.5 lb |
| 30386-0043 | 100 lb | 1 lb |
| 30446-0033 | 250 lb | 2.5 lb |
| 30446-0017 | 500 lb | 5 lb |
| 30444-0019 | 1,000 lb | 10 lb |
| 30388-0017 | 2,000 lb | 20 lb |
| 30389-0016 | 5,000 lb | 50 lb |
| 30423-0014 | 10,000 lb | 100 lb |
| 30449-0014 | 25,000 lb | 250 lb |
| Capacity | Deflection |
|---|---|
| 50 - 250 lb (25 - 100 kg) | 0.019" |
| 500 lb (200 kg) | 0.016" |
| 1,000 lb (500 kg) | 0.018" |
| 2,000 lb (1,000 kg) | 0.011" |
| 5 and 10,000 lb (2 and 5,000 kg) | 0.010" |
| 25,000 b (10,000 kg) | 0.022" |
When measured across the center of top- and bottom-loading holes
| 1. | Deflection beam |
| 2. | Dial indicator with zero at standard 12:00 position |
| 3. | Bezel |
| 4. | Maximum load pointer (optional) |
| 5. | Pressure button |
| 6. | Slanted Anvil |
| 7. | Dial indicator plunger |
| 8. | Anvil set screw |
| 9. | Mounting bracket for dial indicator |
| 10. | Screws for mounting bracket |
| 11. | Bezel-locking screw |
| 12. | Loading ball |
| 13. | Spring retainer clip |
A D-shaped deflection beam is the heart of the Dillon Force Gauge. Machined to close tolerances, beams are heat treated to develop optimum strength and spring characteristics. High-strength aluminum is used in Model X instruments through 500 lb (200 kg). Ranges above this are fabricated from aircraft-quality alloy steel.
A precision dial indicator is mounted at the null point of the deflection beam. The indicator plunger rests against a slanted anvil at the open end of the beam, as shown in the photo. Under compression loads, the two halves of the beam tend to close. Tension force causes them to move apart. This action pushes the plunger inward, as determined by the slant of the anvil. Readings produced on the dial are in direct relation to applied load. The pointer revolves 360° clockwise under compression or tension forces. Push-pull gauges read half scale (180°) clockwise in compression, and counterclockwise, 180° from center zero under tension loads.
A precision dial indicator is mounted at the null point of the deflection beam. The indicator plunger rests against a slanted anvil at the open end of the beam, as shown in the photo. Under compression loads, the two halves of the beam tend to close. Tension force causes them to move apart. This action pushes the plunger inward, as determined by the slant of the anvil. Readings produced on the dial are in direct relation to applied load. The pointer revolves 360° clockwise under compression or tension forces. Push-pull gauges read half scale (180°) clockwise in compression, and counterclockwise, 180° from center zero under tension loads.
- Shockless dial indicator for installations involving the sudden application or release of force. (Maximum pointer cannot be supplied with shockless dial indicator)
- Maximum load pointer which remains at peak load until manually reset.
- Zero position on dial may be factory positioned at 12, 3, 6, or 9 o'clock. Standard position is at 12 o'clock.
| Warranty | 2 Years |
| Accuracy | ±1% Model 30449-0014: ±2% |
| Operating Temperature | up to 120°F (48°C) |
| Overload rating | Accidental overloads up to 30% of capacity can be safely sustained without injury to the dial indicator or deflection beam. All capacities feature a 5:1 design safety factor. |
| Item | Description | Price | ||
|---|---|---|---|---|
| Models without Maximum Hand | ||||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 50lb Capacity | $1,565.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 100lb Capacity | $1,565.00 | |||
X-C Mechanical Force Gauge Tension/Compression, Calibration without Maximum Hand,250lb Capacity | $1,565.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 500lb Capacity | $1,595.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 1,000lb Capacity | $2,065.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 2,000lb Capacity | $2,065.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 5,000lb Capacity | $2,575.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 10,000lb Capacity | $3,220.00 | |||
X-C Mechanical Force Gauge Compression Calibration without Maximum Hand - 25,000lb Capacity | $4,950.00 | |||
| Models with Maximum Hand | ||||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 100lb Capacity | $1,735.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 250lb Capacity | $1,735.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 500lb Capacity | $1,735.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 1,000lb Capacity | $2,210.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 2,000lb Capacity | $2,210.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 5,000lb Capacity | $2,740.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 10,000lb Capacity | $3,840.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 25,000lb Capacity | $4,930.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 50kg Capacity | $1,735.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 100kg Capacity | $1,735.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 200kg Capacity | $1,735.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 500kg Capacity | $2,210.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 1,000kg Capacity | $2,210.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 2,000kg Capacity | $2,740.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 5,000kg Capacity | $3,840.00 | |||
X-C Mechanical Force Gauge Compression Calibration with Maximum Hand - 10,000kg Capacity | $4,930.00 | |||
AWT05-500431 | X-Force Gauge, 5000kg capacity, 50kg resolution with SW and Klaxon ALARM | $7,690.00 | ||
In stock
1 Week Lead Time (Estimated)
2-3 Week Lead Time (Estimated)
Lead Time Varies, Please contact us for availability.
Unavailable
