For material diameters: 7 Models up to 46 mm Diameter (up to 1-3/4")
Capacities up to 30,000 Kg (66,000lbs or 300kN)
The new Cable Bull CBM Cable Tension Meter is a new innovative solution for hand-held portable tension measurement. Several models ae offered covering a different diameter range as well as tension range. The ABM is suitable for use on all types of materials including wire rope, synthetic cable, bare or insulated wires. We will require details on the cable type to be measured; including material type, diameter, strand configuration, free span length and minimum and maximum working tension range.
CBM-SR8 for samples diameters 1 - 8 mm
CBM-SR12 for sample diameters 4 - 12mm
CBM-SR16 for sample diameters 8 - 16 mm
CBM-SR22 for sample diameters 14 - 22 mm
CBM-SR30 for sample diameters 20 - 30 mm
CBM-SR38 for sample diameters 28 - 38 mm
CBM-SR46 for sample diameters 36 - 46 mm
Capacities up to 30,000 Kg (66,000lbs or 300kN)
The new Cable Bull CBM Cable Tension Meter is a new innovative solution for hand-held portable tension measurement. Several models ae offered covering a different diameter range as well as tension range. The ABM is suitable for use on all types of materials including wire rope, synthetic cable, bare or insulated wires. We will require details on the cable type to be measured; including material type, diameter, strand configuration, free span length and minimum and maximum working tension range.
CBM-SR8 for samples diameters 1 - 8 mm
CBM-SR12 for sample diameters 4 - 12mm
CBM-SR16 for sample diameters 8 - 16 mm
CBM-SR22 for sample diameters 14 - 22 mm
CBM-SR30 for sample diameters 20 - 30 mm
CBM-SR38 for sample diameters 28 - 38 mm
CBM-SR46 for sample diameters 36 - 46 mm
Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) as well as running lines. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in a similar applications. This CBM can also be considered a Rope Tension Meter designed to measure the static tension in wire ropes, cables, electrical conductors, guy wires, support cables and more.
Applications include guy wires, support cables, tethers, elevator load measuring, tension equalization in elevator ropes, rope sets, service lifts inside wind turbine systems, tensioning, protecting cranes and hoists from overload, tension measurement in stay ropes / cables, suspension ropes and railway catenary ropes, vehicle pull test, for safe loading in material handling, load securing control, tension control of lashing straps, equalize loadings on multi-cable assemblies, and much more.
- Built-in Diameter Compensator for each range
- Sophisticated roller geometry and minimal deflection angle allows the CBM to measure with the highest accuracy
- Hardened Steel "skids" are used to measure static tensions
- Hardened Steel rollers/sheaves are offered when the material is moving through the sensor
- Choice of "front side" or "rear side" position of Lever-Lock mechanism which opens and closes the measuring system
- Fabricated from Stainless Steel and Aluminum for trouble-free use even in the toughest in-field applications
- Connects to lightweight, battery-powered tension indicator for maximum portability and ease of use
- Can be used on cable diameters below and above specified range with only small additional inaccuracy
| Model | Dia. (mm) |
Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Low Range (LR) | Standard | High Range (HR) | |||||||||
| SR8/400 | 1 - 8 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| SR12/400 | 4 - 12 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| Model | Dia. (mm) |
Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Low Range (LR) | Standard | High Range (HR) | |||||||||
| SR8/500 | 1 - 8 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| SR12/500 | 4 - 12 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| Model | Dia. (mm) |
Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Low Range (LR) | Standard | High Range (HR) | |||||||||
| SR8/600 | 1 - 8 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| SR12/600 | 4 - 12 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| SR16/600 | 8 - 16 | kN Kg Lbs |
1 100 220 |
2 200 440 |
3 300 660 |
4 400 880 |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
| Model | Dia. (mm) |
Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | High Range (HR) | Extended Range (ER) | |||||||||
| SR12/800 | 4 - 12 | kN Kg Lbs |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
NA | NA |
| SR16/800 | 8 - 16 | kN Kg Lbs |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
NA | NA |
| SR22/800 | 14 - 22 | kN Kg Lbs |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
200 20,000 44,000 |
NA |
| SR30/800 | 20 - 30 | kN Kg Lbs |
5 500 1,100 |
10 1,000 2,200 |
20 2,000 4,400 |
30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
200 20,000 44,000 |
300 30,000 65,000 |
| SR38/800 | 28 - 38 | kN Kg Lbs |
NA | NA | NA | 30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
200 20,000 44,000 |
300 30,000 65,000 |
| SR46/800 | 36 - 46 | kN Kg Lbs |
NA | NA | NA | 30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
200 20,000 44,000 |
300 30,000 65,000 |
| Model | Dia. (mm) |
Capacity | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | High Range (HR) | Extended Range (ER) | |||||||||
| SR38/1000 | 28 - 38 | kN Kg Lbs |
NA | NA | NA | 30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
200 20,000 44,000 |
NA |
| SR46/1000 | 36 - 46 | kN Kg Lbs |
NA | NA | NA | 30 3,000 6,600 |
40 4,000 8,800 |
50 5,000 11,000 |
100 10,000 22,000 |
200 20,000 44,000 |
NA |
| Outer Roller Spacing (c:c) | 400 mm, 500 mm, 600 mm, 800 mm or 1000 mm |
| Wrap Angle | approx. 3 Degrees (varies by model) |
| Additional Length Effect | 0.12 mm |
| Roller Material | Hardened Steel |
| Overload Protection | 200% + |
| Calibration Certificate | Optional |
Thank You
Thank you for your quote request, we will contact you within 1-2 business days.
There was an error submiting the form. Please try again.
