View Larger Image
|
|
TD-1-TS
Tension Indicator |
Accurately displays tension values calibrated in any unit of measure on a bright LED display, designed for flush panel mounting.
 Calibration and alarm settings are adjusted using screw poten-tiometers located behind the removable front panel.
|
 Designed for use with the TS621 Strain Gauge Amplifier or the RFSE Tension Sensor | | Provides 24 VDC power for TS621or RFSE |
| | User-set High & Low Alarm Limits with relays | | 4-20 mA and 0-10 VDC analog output (user set) |
|
|
RFS
On-Line Tension Sensor |  |
Resolution of 0.1% and better Rugged stainless steel housing is environmentally sealed
Overload protection up to 800% | | Click image for more info | | ___________________________________________ |
|
TS621
Strain Gauge Amplifier |  |
Designed for use with a wide range of strain-gauge-based force, load and tension sensors
0-10VDC analog output
| | Click image for more info
|
| Display Range |
0– 1999 (calibrated for any units) |
| Display |
3 1 /2 - digit Red LED, 14.4mm high |
| Decimal Point |
User-selected via internal jumper |
| Power Supply |
24 VDC @ 100mA |
| Analog Output |
4–20 mA or 0–10 VDC, user selected |
| Frequency Response |
1 Hz (with damping filter)
40 Hz (without damping filter) |
| Enclosure Material |
High-Impact Plastic |
| Dimensions |
3.78" W x 1.89" H x 4.04" D
(96 x 48 x 103mm) |
| Panel Cutout |
92 x 44mm |
| Operating Temperature |
32 to 122° F (0–50° C) |
| Relay Operation |
Hi–Hi/Hi or Hi–Lo |
| Relay Rating |
1 Amp @ 250 VAC/ 30 VDC, normally open |
| Power Required |
115/ 230 VAC + 10%, 50/ 60 Hz |
|
|
